ALIAS UKRAINE, LLC

The company operates a full cycle: from consultation and calculation to immersion in a 14-meter-long bath and delivery of finished galvanized products throughout Ukraine.

What exactly does ”ALIAS UKRAINE” galvanize?
- metal structures of any complexity (power line elements, barrier fences, staircases, frames of industrial buildings);
- hardware and fasteners (bolts, nuts, washers, anchors, clamps M8–M80 with clean thread after centrifugation);
- forged products, gates, fences, grilles (service life up to 120 years);
- faceted and round-conical street lighting poles (3–16 m);
- frames of greenhouses, hangars, silos, elevators and warehouses;
- pipes for mines and mining industry according to DSTU 2026 standards.

Zinc coating thickness - 80-200+ microns (depending on the aggressiveness class of the environment C3–C5). Quality control - with an Elcometer thickness gauge with issuance of a report. Full compliance with standards: DSTU EN ISO 1461:2024, GOST 9.307-2021, ISO 10684:2008.

Hot-dip galvanizing of metal structures in Ukraine: reliable anti-corrosion protection for 50–80+ years from LLC ”ALIAS UKRAINE”.

In modern operating conditions, metal structures are constantly exposed to moisture, salts, chemicals, and atmospheric factors. Without high-quality protection, corrosion can destroy even the strongest steel in 5–10 years. That is why hot-dip galvanizing of metal structures remains the most effective and cost-effective solution. LLC ”ALIAS UKRAINE” - a leading specialist in hot-dip galvanizing in Ukraine since 2012 - offers a full range of services that guarantees the durability of products in any climatic zones of the country.

The company combines modern European equipment, extensive experience and strict quality control according to the standards DSTU EN ISO 1461:2024 and GOST 9.307-2021. The result is a uniform zinc coating with a thickness of 80–200 microns, which not only creates a physical barrier, but also provides cathodic (electrochemical) protection. Even scratches on the surface “self-heal” due to zinc migration.

Why is hot-dip galvanizing of metal more profitable than other methods?
1) Service life of 50–80+ years without repair and painting (in a C3–C4 environment, typical for Ukraine);
2) Full protection of all surfaces, internal cavities, threads and welds;
3) Savings - over 30 years of operation, the cost of maintaining structures is reduced by 3–5 times;
4) Environmental friendliness - reduction of CO₂ emissions by 30–60% compared to other methods of anti-corrosion protection;
5) Certification for ProZorro, Ukravtodor, Oblenergo tenders and critical infrastructure.
Hot-dip galvanizing of metal structures is especially relevant for road fences, power transmission line supports, building elements, greenhouses, hangars, silos, elevators and mine pipes.

Services LLC ”ALIAS UKRAINE”
The company performs a full cycle:
- hot-dip galvanizing of metal - any steel structures of complex geometry, weighing from several kilograms to multi-ton elements. Price from 20 UAH/kg;
- hot-dip galvanizing of hardware - bolts, nuts, washers, anchors, clamps (M8–M80) with preservation of clean thread due to centrifugation. Price from 25 UAH/kg.;
- manufacture of lighting poles - faceted and round-conical street lighting poles 3–16 m high with subsequent hot-dip galvanizing (coating thickness from 85 μm for tender requirements).

Additionally, the company offers metal galvanizing for forged products, gates, fences, staircases and pipelines. All work is performed with a coating thickness control protocol using a certified Elcometer thickness gauge.

Hot-dip galvanizing Kiev and hot-dip galvanizing Cherkasy - convenient delivery throughout Ukraine

LLC ”ALIAS UKRAINE” is hot-dip galvanizing Cherkasy on a powerful production base with a bath 14 meters long and hot-dip galvanizing Kiev with weekly flights. The company accepts orders from any region: Lviv, Odesa, Dnipro, Kharkiv, Zaporizhia, Poltava and other cities.
Free delivery from 20 tons, urgent execution in 1-3 days.
Cost calculation in 15 minutes by photo, drawings or specification.

The process of galvanizing metal occurs at a temperature of about 450 ° C. The product is immersed in molten zinc, a strong Fe-Zn alloy is formed, which has a higher hardness than steel itself. After centrifugation and cooling, the surface acquires a characteristic shiny or matte appearance (depending on the requirements).

Each batch is accompanied by:
- a coating thickness test report;
- a certificate of conformity;
- a coating guarantee.

Hot-dip galvanizing in Ukraine from LLC ”ALIAS UKRAINE” is not just a service, but an investment in the durability of your facilities. Regardless of whether you need hot-dip galvanizing of metal structures for construction, reconstruction or industrial production - the result will exceed expectations.